Cylia
Print the product sheet

CYLIA

Enamelled cylinder of 300 litres with air/water heat pump, for production and storage of domestic hot water (at 60°C).
As a consequence of its high efficiency (COP 3.5) and low energy demand, it can be fed with electric energy coming from photovoltaic solar plants. The version with fixed coil exchanger can be connected also to other energy sources, such as thermal solar, biomass boilers, etc.

FEATURES

Available versions: heat pump air/water - heat pump air/water with exchanger for second energy source.

Features:
- Cylia is a heat pump which supplies domestic hot water up to 60°C without any integration.
- Cylia picks up the heat from room air and transfers it to water, supplying up to 3,5 times more than the electric energy consumed.
- Energy extracted from air is a notable and free contribution for your needs: Cylia can recover the hot air in summer, or the humidity from a laundry in winter.
- Cylia is supplied with a tank of 300 litres, with enamelled internal coating, and insulation of hard injected polyurethane.
- You can also request a version with auxiliary exchanger for other energy sources (solar, gas boiler, etc.).
- Each item includes: a control panel, an immersion heater and a magnesium anode.

Possibile use:
Cylia recovers energy contained in room air (not heated) as heat and humidity, and transfers it to domestic water. In summer, Cylia supplies hot water and cools your rooms: the cellar in the case of standard installations, and the living-room if you also use accessories for air collection. In winter, Cylia supplies hot water and prevents unheated rooms from becoming damp: e.g. laundry, garage, gymnasium.

TECHNICAL INFORMATION

Cylinder volume l 300
Maximum pressure bar 10
Height mm 1695
External diameter mm 700
Weight Kg 125
Electric supply   230 V - 50 Hz
Heat transfer fluid   R134a (1,0 kg)
Domestic water temperature 23 - 60
Air temperature °C 8 - 35
Air flow rate mc/h 450
Maximum lenght
air pipes
m 10
Air pipe diameter mm 160
Second energy source
exchanger surface
mq 1,45
Water connections   1"
Recirculation   ¾"
Auxiliary exchangerconnections   1"
Immersion
heater power
W 1500
Power needed
for water at 60°C
W 615
Power released
for water at 45°C
W 1870
COP at 45°C according to EN 255   3,5
Thermal consumption
at 45°C for 24 h
KWh/24h 1,13

TECHNICAL DRAWING

ACCESSORIES

Standard accessories:
  • magnesium anode
  • immersion heater
  • control panel

Optional accessories:
  • insulated flexible sheath
  • PVC bend
  • silencer



Company data  |  Privacy  |  Credits

IMA srl  |  Via Filottrano 45  |  60027 Osimo (AN), Italy  |  tel +39.071.7200010  |  fax +39.071.7100498  |  VAT 00933910424  |  info@imaheating.it